Control Surfaces & MIDI Interfaces — Digi 002 Systems for Mac OS 9

Control Surfaces

The Digi 002 includes 8 touch-sensitive, motorized faders. These can also be used simultaneously with other MIDI control surfaces to add more faders to your Digi 002.

The following control surfaces are qualified for use with Digi 002 systems with Pro Tools LE version 5.3.2 software:

• CM Labs MotorMix™
• JL Cooper CS-10™ MIDI series
• Mackie Designs HUI™ (HUI firmware v1.4.5 or higher required)
• Peavey PC-1600™

For further information about these products, please contact your Authorized Digidesign Dealer and ask for the Digidesign Development Partner Catalog, or available online at www.DigiDevelopers.com

Notes:

• Digidesign Control|24, ProControl, FaderPack and EditPack are not compatible with Digi 002 systems.
• The Digi 002 faders cannot be used to control any device other than the Digi 002

MIDI Interfaces

The Digi 002 includes a built-in MIDI interface with 1 MIDI In port and 2 MIDI Out ports, providing up to 16 channels of MIDI input and up to 32 channels of MIDI output.

The following MIDI Interfaces are also qualified for use with Digi 002 systems with Pro Tools LE version 5.3.2 software for Mac OS 9:

• Digidesign MIDI I/O - USB MIDI Interface with 10 MIDI I/O ports, supporting 160 MIDI channels
• Emagic Unitor8
• Emagic AMT8
• MOTU MTP AV (USB)
• MOTU Fastlane MIDI Interface
• Midiman MIDISPORT 2x2

MIDI interfaces must be USB. Macintosh modem to serial port adapters such as the GeeThree Stealth Port and Griffin g4Port and USB to serial adapters such as the Keyspan device are not supported with Digi 002 systems.