Power Macintosh G4 (PCI Graphics) - Digi ToolBox XP Requirements
G4 (PCI Graphics) Processors of all speeds supported
See Apple's tech archive for more info on how to differentiate between AGP Graphics and PCI Graphics G4 models at: http://www.info.apple.com/kbnum/n58418
Power Macintosh G4 version history available at www.everymac.com
Mac OS 9.0.4, 9.1, 9.2.2
QuickTime 4.1.2 required with Pro Tools v5.1.1 (included with Mac OS 9.0.4, Pro Tools installation CD, or download the standalone QuickTime 4.1.2 Installer from Apple. QuickTime 5.0.2 is also supported)
Power Mac G4 ROM 1.8.1 Update required
MIDI: Both USB and serial MIDI interfaces work effectively with Pro Tools. Serial MIDI interfaces require either a Mac serial port or a qualified modem-to-serial port adapter. Digidesign currently supports the GeeThree Stealth Port or Griffin gPort installed in the modem port (thereby not using a PCI slot).
When using the GeeThree products with OS 9.0.4, version 1.0.3 or higher of the Stealth Port extension is required, available here: http://www.geethree.com/download.html
External Floppy Diskette Drive
Although not required with Pro Tools installation, an external floppy diskette drive may be required for some Plug-Ins installations. The following external USB diskette drives are currently supported:
Links to software and drivers are available in the Digidesign Support/Downloads/Utilities Section:
Apple's revised USB support allows for booting from a USB drive, therefore you should not boot up your system with an authorization disk inserted in the USB Drive.
Built-in Firewire ports on the PowerMac PCI Graphics G4 are not recommended with firewire hard drives due to poor performance.
SCSI Accelerator (Host Bus Adapter) Card NOT required:
Although Pro Tools LE supports a full 24 tracks of record and playback on a dedicated ATA/IDE or Firewire hard drive, use of a SCSI HBA card with a SCSI drive can increase some performance aspects of your Pro Tools LE system. For more information refer to the Audio Storage Requirements page.
The following SCSI HBA cards are qualified with the PowerMac G4 desktop models with Pro Tools LE:
Digidesign SCSI|128 Kit (includes ATTO EPCI-UL3D Dual Channel Ultra3 SCSI Host Bus Adapter)
Digidesign SCSI64 Kit (with ATTO EPCI-DC Dual Channel Ultra/WIDE SCSI Host Bus Adapter)
ATTO EPCI-DC (Dual Channel Ultra/WIDE SCSI Host Bus Adapter)
ATTO EPCI-UL2D (Dual Channel Ultra2 SCSI Host Bus Adapter, discontinued)
ATTO EPCI-UL3D (Dual Channel Ultra3 SCSI Host Bus Adapter - Model # EPCI-UL3D-000)
Note: The 66MHz version of the ATTO EPCI-UL3D (model # EPCI-UL3D-066) is not supported for use with Pro Tools systems, regardless of whether your Pro Tools system is installed on a 33 MHz or 66 MHz PCI bus. The 66 MHz version is tuned for performance on a 66 MHz PCI bus. However, when Pro Tools is installed in a 66 MHz PCI bus, it reduces the speed of the PCI bus to 33 MHz. As a result, you will receive superior performance with the 33 MHz UL3D, because it is tuned for a 33 MHz PCI bus.
Recommended ATTO settings for approved SCSI Host Bus Adapters with Mbox:
Adaptec Power Domain SCSI HBA 2906 with the following requirements: