iMac G4 — Digi 002 Requirements

With Pro Tools LE 6.4 for Mac OS X 10.3 (Panther)


The following iMac G4 models are compatible, but have not been fully tested and qualified with Digidesign Digi 002 systems and Pro Tools LE 6.4. These models may be able to provide full track count performance, however, they cannot be guaranteed to do so. Your performance and track count may vary depending on the processor count and speed

Model & Processor

 

LCD Screen

iMac 1.25 GHz G4

 
20 Inch Display

iMac 1.25 GHz G4

 
17 Inch Display
iMac 1 GHz G4
 
17 Inch Display
iMac 1 GHz G4
 
15 Inch Display

The following iMac G4 Flat Panel computers are qualified for use with Digi 002 Pro Tools LE systems, but may result in lower performance:

  • iMac G4 – 800 MHz 15 and 17 Inch Display
  • iMac G4 – 700 MHz 15 Inch Display

Qualified with Pro Tools LE 6.7, not tested with Pro Tools LE 6.4:

  • iMac G5 — All Models

Not Tested:

  • Apple eMac — All Models
  • Although not tested by Digidesign, there are no known issues with the eMac compared to iMac G4 models with similar processor speeds.

The following computers are unsupported for use with Digi 002:

  • iMac G3 — All Models

Additional Requirements

System Software

iLok Authorized Plug-Ins

Hard Drives — Audio Storage Requirements

Although limited recording and playback of audio tracks may be possible using the internal drive in the iMac, a separate dedicated audio hard drive is highly recommended for maximum performance and track count.

Firewire Hard Drives

Maximum Performance Guidelines

  • Recording to the system startup drive is not recommended or supported
  • When using FireWire storage with Digi 002 systems, connect the Digi 002 and the drives to separate FireWire ports if possible
  • If only one port is available, connect the drives to the CPU using a 1 meter firewire cable, then connect the Digi 002 to the drives

Known Incompatibilities & Issues

  • The Movie Offset feature affects both the QT Movie output to DV and the Onscreen movie
  • If users want to use Japanese fonts in their sessions, they will not be able to use HFS (standard) drives – only HFS+ formatted drives
  • Sometimes when opening a session that was based on a PT 3.2 format session, the following error may occur when Restoring IO paths: Time type mismatch occurred in "Time_Typed.cpp" line 370. A reboot may be necessary if this occurs
  • System instabilities and performance issues can occur when using MIDI control surfaces in conjunction with Pro Tools 6 and 3rd party MIDI interfaces. For best multiport MIDI performance, we recommend using Digidesign's MIDI I/O. (only if additional MIDI ports are required beyond the 16 in/32 out built into the Digi 002)
  • Pro Tools LE core systems cannot be combined, and multiple units are not supported. For instance:
    • A Digi 002 and Digi 002 Rack cannot be used together on the same computer at the same time.
    • 2 Digi 002 units cannot be used on the same computer.
    • Digi 002 faders cannot be used with any other system.
  • Pro Tools 6 does not work in the OS 9 "Classic Mode". You must choose Mac OS X as your Startup Disk.

Download Updates

Additional Information

See also: Getting Started with Digi 002 and the Pro Tools LE 6 Read Me documents in the Support > Tech Support > Technical Document Library and included with new Digi 002 systems.


Digidesign Compatibility Documents Index