Other Digidesign PCI Card Options - Pro Tools III

DSP Farm - PCI*: DSP Farms with serial numbers lower than FG10501 may be used for Plug-In operation but do not support connection of an Audio Interface.

SampleCell II Plus

SampleCell II - PCI*

SampleCell II TDM Module - PCI

*Incompatibility with Disk I/O, older DSP Farms and SampleCell II Cards & The Blue & White G3 and G4:
A rev "QC" or later of the AMCC chip is required for Blue & White G3 and G4 compatibility. This rev number appears on the AMCC chip following number "5933". Older versions can cause your computer to hang while booting or when launching Pro Tools or DigiTest. QC or higher chip is required for compatibility with the PCI 2.1 spec. Ways to identify these boards are in the grid below:

If a customer has previously updated their board (or received a refurbished card), the serial number will remain the same, but the board rev will be updated (and the AMCC chip will have "QC" or later). Cards with the rev "Q" chip can be upgraded. Please contact Digidesign Technical Support to arrange for a return authorization. Registration is required.

Note: All SampleCell II Plus cards are newer, and therefore already have the compatible chip.(The SampleCell II Plus cards are the same as the original SampleCell II PCI cards, but with the included 32 MB of RAM soldered on the card)