Pro Tools TDM 6.9.1cs1 Update for Windows XP
For Pro Tools|HD and Pro Tools|HD Accel Systems with Pro Tools TDM 6.9.1 for Windows XP

Index of All Pro Tools CS Updates

July 13, 2005

Will not work without Pro Tools TDM 6.9.1 for Pro Tools|HD or Pro Tools|HD Accel systems already installed.

Download update from Pro Tools TDM 6.4, 6.7, or 6.9 for HD systems to Pro Tools 6.9.1 for HD systems:

• Pro Tools TDM 6.9.1 Update

Pro Tools TDM 6.9.1cs1 Update

From the Included Pro Tools TDM 6.9.1cs1 Read Me:

What's Fixed in Pro Tools TDM 6.9.1cs1?

Pro Tools TDM 6.9.1cs1 for Windows XP contains the following:

Fixed: Legacy Peripherals Attached to a 192 I/O or a 96 I/O (with Firmware Version 4.3) Would Exhibit Incorrect Gain at Their Inputs (Item # 59048)

• If you have a 192 I/O or 96 I/O, and the interface firmware version is 4.3, you need to run the DigiTest firmware updater. If your 192 I/O or 96 I/O has firmware version 3.0, incorrect input gain on legacy peripherals will not occur, and you will not be able to update the firmware. This does not apply to the 96i, which does not have a legacy port.

To verify and update the firmware version:

1. Launch the DigiTest application
2. Click on the Firmware tab
3. Make sure the peripheral information for the appropriate card slot is being displayed, and press "Rescan" if necessary
4. Do one of the following:
   
   • If the firmware version in the selected peripheral is 4.3, lower the gain on your audio monitors and press "begin update."
   • If the firmware version is 3.0, you have the correct firmware and you do not need to do anything.
   • If the firmware version is less than 3.0, update the firmware to version 3.0. (This is unrelated to the legacy peripheral bug.)

Fixed: External Devices Could Not Embed Audio Into The AVoption|V10 SDI Output Stream During Pro Tools Playback (Item #65082)

• External devices could not embed audio into channels 1-4 of the SDI stream because Pro Tools was embedding digital silence into the stream. Please note that this is only fixed for Pro Tools output – a fix for Media Station|PT is expected in the future.

Who Should Use Pro Tools TDM 6.9.1cs1?

This update is recommended for all Pro Tools TDM 6.9 users and contains fixes in the following areas:

• Legacy peripherals only if your 192 or 96 I/O has firmware version 4.3
• Using the video SDI output from AVoption|V10 when playing from a Pro Tools session.

Updating Pro Tools

To update to Pro Tools TDM 6.9.1cs1:

1. Verify Pro Tools TDM 6.9.1 is installed on your Pro Tools|HD or Pro Tools|HD Accel system.
2. Quit the Pro Tools application if it is open.
3. Locate the Pro Tools TDM 6.9.1cs1 installer and launch it.
4. Follow the onscreen instructions to install Pro Tools TDM 6.9.1cs1.
5. When installation is complete, restart your computer.

If you have installed previous updates, some file versions may not change. This update installs the following files:

• DigiTest.exe (v6.9.1cs1)
• VeDioIF.dll (v6.9.1cs1)

Download Instructions — Pro Tools TDM 6.9.1cs1 Update

For best results, use the latest version of Internet Explorer for Windows XP. Other browsers may not work properly with this download. This Pro Tools TDM 6.9.1cs1 Update requires a Pro Tools|HD or Pro Tools|HD Accel hardware system with Pro Tools TDM 6.9.1 software already installed.

Download Help

• If you experience download or decoding problems, see Download & Website Help
• Windows ZIP (.zip) format downloads should be "Saved to Disk" first, rather than opened on the internet. These can be expanded on Windows XP systems by right-clicking on the downloaded files and choosing "Open".