|
Pro Tools 4.0.1 NuBus Systems Compatibility
Supported Digidesign Hardware, Software, and
CPU Configurations
Pro Tools III -- NuBus
System
|
Digidesign Cards
Disk I/O - NuBus DSP Farm - NuBus
Bridge I/O
Digidesign Peripherals
888 I/O
882 I/O
882 Studio I/O (on first Disk I/O only.)
Required Software Components
DAE 3.1.1 & DigiSystem INIT 3.1.1
PowerMix 1.1.24
Pro Tools 4.0.1
TDM Mixer Plug-In 1.4
Expansion Chassis Options
Digidesign Expansion Chassis
Third-Party Video Capture Cards
Radius Videovision Studio
Truevision Targa 20006
|
Optional Digidesign Hardware
SampleCell II - NuBus SampleCell II TDM Module3 - NuBus
Digidesign ADAT® Interface
SMPTE Slave Driver (w/SSD Setup 1.3)
Video Slave Driver
Optional Digidesign Software
DINR-TDM 2.2 & DINR-SDII 1.1
DPP-1 1.2 D-Verb 1.2
Focusrite d2 1.1
MachineControl 1.0
MasterList CD 1.3
PostConform 1.0
SampleCell Editor 2.1.1 (w/SampleCell II)
SampleCell-TDM 1.1.1 (w/TDM Module) Sound Designer II 2.82
Turbosynth SC 2.22
|
Computer Requirements
• Apple System software v7.5.3 or higher
• 32 MB RAM minimum, 48 MB recommended (Additional RAM
required for simultaneous use with MIDI sequencers. Virtual
memory is not supported).
• Opcode OMS software v2.3 or higher (supplied)
• Apple QuickTime v2.5 or higher (supplied)
Supported CPU Models & Speeds
Apple Computer
Quadra 9501/5
Quadra 9001/5
Quadra 840av5
Quadra 8005
Quadra 7005
Quadra 6505
Power Macintosh 61002
all speeds
Power Macintosh 7100 all speeds
Power Macintosh 8100 all speeds
Power Computing
Power 100 all speeds
|
Pro Tools Project -- NuBus
System
|
Digidesign Cards
Pro Tools Project Card
Digidesign Peripherals
888 I/O
882 I/O
882 Studio
Required Software Components
DAE 3.1.1 & DigiSystem INIT 3.1.1
PowerMix 1.1.24
Pro Tools 4.0.1
Third-Party Video Capture Cards
Radius Videovision Studio
Truevision Targa 20006
|
Optional Digidesign Hardware
SampleCell II - NuBus Digidesign ADAT® Interface
SMPTE Slave Driver (w/SSD Setup 1.3)
Video Slave Driver
Optional Digidesign Software
DINR-SDII 1.1 MachineControl 1.0
MasterList CD 1.3 SampleCell Editor 2.1.1 (w/SampleCell II)
Sound Designer II 2.82 Turbosynth SC 2.22
Computer Requirements
• Apple System software v7.5.3 or higher
• 32 MB RAM minimum, 48 MB recommended (Additional RAM
required for simultaneous use with MIDI sequencers. Virtual
memory is not supported).
• Opcode OMS software v2.3 or higher (supplied)
• Apple QuickTime v2.5 or higher (supplied)
|
Supported CPU Models & Speeds
Apple Computer
Quadra 9501/5
Quadra 9001/5
Quadra 840av5
Quadra 8005
Quadra 7005
Quadra 6505
Power Macintosh 61002
all speeds
Power Macintosh 7100 all speeds
Power Macintosh 8100 all speeds
Power Computing
Power 100 all speeds
|
Pro Tools with Audiomedia
II -- NuBus System
|
Digidesign Cards
Audiomedia II
Required Software Components
DAE3.1.1 & DigiSystem INIT 3.1.1
Pro Tools 4.0.1
PowerMix 1.1.24
Third-Party Video Capture Cards
Radius Videovision Studio
Truevision Targa 20006
|
Optional Digidesign Hardware
SampleCell II - NuBus
Optional Digidesign Software
DINR-SDII 1.1
MasterList CD 1.3
SampleCell Editor 2.1.1 (w/SampleCell II)
Session Software 2.0 (Macintosh)
Sound Designer II 2.82
Computer Requirements
• Apple System software v7.5.3 or higher
• 32 MB RAM minimum, 48 MB recommended (Additional RAM
required for simultaneous use with MIDI sequencers. Virtual
memory is not supported).
• Opcode OMS software v2.3 or higher (supplied)
• Apple QuickTime v2.5 or higher (supplied)
|
Supported CPU Models & Speeds
Apple Computer
Quadra 9501/5
Quadra 9001/5
Quadra 840av5
Quadra 8005
Quadra 7005
Quadra 6505
Power Macintosh 61002 all speeds
Power Macintosh 7100 all speeds
Power Macintosh 8100 all speeds
Power Computing
Power 100 all speeds
|
Pro Tools with PowerMix--
NuBus System
|
Required Software Components
DAE 3.1.1 & DigiSystem INIT 3.1.1
PowerMix 1.1.2
Pro Tools 4.0.1
Third-Party Video Capture Cards
Radius Videovision Studio
Truevision Targa 20006
Optional Digidesign Hardware
SampleCell II - NuBus
Optional Digidesign Software
SampleCell Editor 2.1.1 (w/SampleCell II)
|
Computer Requirements
• Apple System software v7.5.3 or higher
• 32 MB RAM minimum, 48 MB recommended (Additional RAM
required for simultaneous use with MIDI sequencers. Virtual
memory is not supported).
• Opcode OMS software v2.3 or higher (supplied)
• Apple QuickTime v2.5 or higher (supplied)
When using PowerMix, track count
varies with CPU speed as follows:
|
Playback Tracks
|
Min CPU Speed
|
|
|
|
|
|
|
|
|
|
|
Supported CPU Models & Speeds
Apple Computer
PowerMac 6100 60/66 MHz
PowerMac 7100 66/80 MHz
PowerMac 8100 80/100/110 MHz
Power Computing
Power 100 all speeds
|
Notes:
1 Requires the Apple Serial Switch CDEV, which
must be set to Compatible mode.
2 Requires the use of the Digidesign Expansion
Chassis.
3 Requires FPGA R05 or higher for Power Macintosh
or TDM compatibility.
4 On Power Macintosh computers only.
5 ProTools 4.0 and higher requires all 040-based
CPUs to include a Floating Point Unit (FPU). NOTE: All Quadras listed
include FPUs as standard.
6 Not supported on Quadra-based Pro Tools systems
|
