PowerBook G4 — Pro Tools|HD & PT5/OS9

Apple PowerBook G4 — Pro Tools|HD

With Pro Tools Version 5.3.1 for Mac OS 9


Apple PowerBook G4 Computers Supported:

Qualified With Pro Tools|HD

 

Not Yet Qualified

550 MHz PowerBook G4

  400 MHz PowerBook G4
667 MHz PowerBook G4   500 MHz PowerBook G4
800 MHz PowerBook G4    

Currently, models 550, 667 and 800 are qualified for up to 48 tracks of 24-bit/96 kHz audio with 4 DigiDrive® FireWire drives. In order to use SCSI drives with the Magma PowerBook chassis, download and install ApplePCI — Apple Multiprocessor and G4 PowerBook Expansion Chassis Fix

The 400 and 500 MHz models are still undergoing testing.

G4 PowerBook CardBus PCI Expansion

  • Magma 4-slot CB4DRQ-D1
  • Magma 2-Slot CB232-D1
  • Magma 2-Slot CB2 (discontinued)
  • Magma 2-Slot CB2S (SCSI model, discontinued)

Supported with Firewire or SCSI drives. In order to use SCSI drives with the Magma PowerBook 2-Slot CB2S chassis or on Mac OS 9, download and install ApplePCI — Apple Multiprocessor and G4 PowerBook Expansion Chassis Fix. Note: SCSI card should be removed entirely for use on Mac OS X

Note that certain models of these 2-slot and 4-slot chassis will need a special resistor kit from Magma to work with Pro Tools|HD cards. This is because the power supplies require a 5-volt load, and Pro Tools|HD cards only supply a 3.3 volt load.

In addition, installing certain cards not manufactured by Digidesign (i.e. Ethernet or the ATTO EPCI-UL3D SCSI Host Bus Adapter) will automatically supply the necessary 5 volt load. In most cases you will be able to easily tell if you need the load resistor to run with only Pro Tools|HD cards installed:

  • CB2 (AC) systems will need the load resistor
  • All systems with "quiet" power supplies (any "Q" model)
  • All chassis purchased prior to January, 2002

You can also email the chassis serial number to [email protected] for confirmation. If necessary, you may order the kit (Part #RESLOAD5V) directly from Magma for @ $13: www.magma.com/pci

Additional Requirements:

Mac OS 9.2.2 Required

  • OS X is not supported with Pro Tools
  • OS X "Classic Mode" is not supported. You must boot choosing Mac OS 9.

External Diskette Drive

Although not required with Pro Tools installation, a Digidesign-qualified external diskette drive may be required for installation of some plug-ins and optional software applications.

MIDI Interface:

Digidesign supports the following MIDI Interfaces for use with the Apple Titanium PowerBook G4 and Pro Tools® 5.3.1:

  • Digidesign MIDI I/O
  • Emagic Unitor8
  • Emagic AMT8
  • MOTU MTP AV - USB
  • MOTU Fastlane MIDI Interface
  • Roland UM4/UM2 MIDI Interface

Firewire Hard Drives

IDE/ATA Hard Drives

  • EIDE drives have not been qualified with this configuration.

SCSI Hard Drives