Digidesign StreamManager

 

Date

Version

Download File

Size

Description

May 2005
6.9
1.0 MB

Digidesign StreamManager Swapper 6.9
(Mac OS X 10.3 Only)

Pro Tools 6.9 HD and HD Accel TDM Systems on Mac OS X 10.3 Only

Release Notes:

Installer Contents

This installer provides two versions of the StreamManager system component that is necessary for use with HTDM plug-ins.

It provides a convenient way to exchange the standard 512-sample buffer version and a low-latency 128-sample buffer version of StreamManager. The low-latency StreamManager yields throughput latencies four times smaller than the default version.

System Requirements

A working installation of Pro Tools v6.9 TDM is required to use StreamManager Swapper 6.9. Older versions of Pro Tools are not qualified for use with StreamManager Swapper 6.9.

A side effect of the lower buffer size is a higher load on your host CPU. In extreme cases, you might not be able to reach the same level of performance achieved with the standard version of StreamManager. If you experience excessive "low CPU" warnings, or even audio dropouts, we recommend going back to the standard 512-sample buffer StreamManager version. If in doubt, review your third party plug-in documentation for buffer size recommendations.

For best system performance, keep the Hardware Buffer Size setting in Pro Tools the same as the chosen StreamManager buffer size. For example, if you are using the 512-sample buffer version of StreamManager, set the Hardware Buffer Size in Pro Tools to 512 samples too.

Please review the included StreamManager Swapper 6.9.pdf for installation and additional instructions.

October 2004
6.7
1.0 MB

Digidesign StreamManager Swapper 6.7
(Mac OS X Only)

Pro Tools 6.7 HD and HD Accel TDM Systems on Mac OS X 10.3 Only

Release Notes:

Installer Contents

This installer provides two versions of the StreamManager system component that is necessary for use with HTDM plug-ins.

It provides a convenient way to exchange the standard 512-sample buffer version and a low-latency 128-sample buffer version of StreamManager. The low-latency StreamManager yields throughput latencies four times smaller than the default version.

System Requirements

A working installation of Pro Tools v6.7 TDM is required to use StreamManager Swapper 6.7. Older versions of Pro Tools are not qualified for use with StreamManager Swapper 6.7.

A side effect of the lower buffer size is a higher load on your host CPU. In extreme cases, you might not be able to reach the same level of performance achieved with the standard version of StreamManager. If you experience excessive "low CPU" warnings, or even audio dropouts, we recommend going back to the standard 512-sample buffer StreamManager version. If in doubt, review your third party plug-in documentation for buffer size recommendations.

For best system performance, keep the Hardware Buffer Size setting in Pro Tools the same as the chosen StreamManager buffer size. For example, if you are using the 512-sample buffer version of StreamManager, set the Hardware Buffer Size in Pro Tools to 512 samples too.

Please review the included StreamManager Swapper 6.7.pdf for installation and additional instructions.

August 2004
6.4
1.0 MB

Digidesign StreamManager Swapper 6.4.1
(Mac OS X Only)

Pro Tools 6.4.1 MIX Systems on Mac OS X 10.3 Only

Release Notes:

Installer Contents

This installer provides two versions of the StreamManager system component that is necessary for use with HTDM plug-ins.

It provides a convenient way to exchange the standard 512-sample buffer version and a low-latency 128-sample buffer version of StreamManager. The low-latency StreamManager yields throughput latencies four times smaller than the default version.

System Requirements

A working installation of Pro Tools v6.4.1 TDM is required to use StreamManager Swapper 6.4.1. Older versions of Pro Tools are not qualified for use with StreamManager Swapper 6.4.1.

A side effect of the lower buffer size is a higher load on your host CPU. In extreme cases, you might not be able to reach the same level of performance achieved with the standard version of StreamManager. If you experience excessive "low CPU" warnings, or even audio dropouts, we recommend going back to the standard 512-sample buffer StreamManager version. If in doubt, review your third party plug-in documentation for buffer size recommendations.

For best system performance, keep the Hardware Buffer Size setting in Pro Tools the same as the chosen StreamManager buffer size. For example, if you are using the 512-sample buffer version of StreamManager, set the Hardware Buffer Size in Pro Tools to 512 samples too.

Please review the included StreamManager Swapper 6.4.pdf for installation and additional instructions.

April 2004
6.4
901 k

Digidesign StreamManager Swapper 6.4
(Mac OS X Only)

Pro Tools 6.4 HD and HD Accel TDM Systems on Mac OS X 10.3 Only

Release Notes:

Installer Contents

This installer provides two versions of the StreamManager system component that is necessary for use with HTDM plug-ins.

It provides a convenient way to exchange the standard 512-sample buffer version and a low-latency 128-sample buffer version of StreamManager. The low-latency StreamManager yields throughput latencies four times smaller than the default version.

System Requirements

A working installation of Pro Tools v6.4 TDM is required to use StreamManager Swapper 6.4. Older versions of Pro Tools are not qualified for use with StreamManager Swapper 6.4.

A side effect of the lower buffer size is a higher load on your host CPU. In extreme cases, you might not be able to reach the same level of performance achieved with the standard version of StreamManager. If you experience excessive "low CPU" warnings, or even audio dropouts, we recommend going back to the standard 512-sample buffer StreamManager version. If in doubt, review your third party plug-in documentation for buffer size recommendations.

For best system performance, keep the Hardware Buffer Size setting in Pro Tools the same as the chosen StreamManager buffer size. For example, if you are using the 512-sample buffer version of StreamManager, set the Hardware Buffer Size in Pro Tools to 512 samples too.

Please review the included StreamManager Swapper 6.4.pdf for installation and additional instructions.

Jan 2004
6.2.3
991 k

Digidesign StreamManager Swapper 6.2.3
(Mac OS X Only)

Pro Tools 6.2.3 TDM Systems on Mac OS X 10.3.2 Only

Release Notes:

Installer Contents

This installer provides two versions of the StreamManager system component that is necessary for use with HTDM plug-ins.

It provides a convenient way to exchange the standard 512-sample buffer version and a low-latency 128-sample buffer version of StreamManager. The low-latency StreamManager yields throughput latencies four times smaller than the default version.

System Requirements

A working installation of Pro Tools v6.2.3 TDM is required to use StreamManager Swapper 6.2.3. Older versions of Pro Tools are not qualified for use with StreamManager Swapper 6.2.3.

A side effect of the lower buffer size is a higher load on your host CPU. In extreme cases, you might not be able to reach the same level of performance achieved with the standard version of StreamManager. If you experience excessive "low CPU" warnings, or even audio dropouts, we recommend going back to the standard 512-sample buffer StreamManager version. If in doubt, review your third party plug-in documentation for buffer size recommendations.

For best system performance, keep the Hardware Buffer Size setting in Pro Tools the same as the chosen StreamManager buffer size. For example, if you are using the 512-sample buffer version of StreamManager, set the Hardware Buffer Size in Pro Tools to 512 samples too.

Please review the included StreamManager Swapper 6.2.3.pdf for installation and additional instructions.

July 2003
6.1
1.6 MB

Digidesign StreamManager 6.1 Installer

Pro Tools 6.1 TDM Systems on Mac OS X Only

Release Notes:

Installer Contents

This installer provides two versions of the StreamManager system component that is necessary for use with HTDM plug-ins.

It provides a convenient way to exchange the standard 512-sample buffer version and a low-latency 128-sample buffer version of StreamManager. The low-latency StreamManager yields throughput latencies four times smaller than the default version.

System Requirements

A working installation of Pro Tools v6.1 TDM is required to install StreamManager v6.1. Older versions of Pro Tools are not qualified for use with StreamManager v6.1.

A side effect of the lower buffer size is a higher load on your host CPU. In extreme cases, you might not be able to reach the same level of performance achieved with the standard version of StreamManager. If you experience excessive "low CPU" warnings, or even audio dropouts, we recommend going back to the standard 512-sample buffer StreamManager version. If in doubt, review your third party plug-in documentation for buffer size recommendations.

Please review the included StreamManager 6.1 Read Me.pdf for installation and additional instructions.

07/02
5.3.1r2_128
371 k

Digidesign StreamManager_128 v5.3.1r2_128

For Pro Tools|HD Macintosh OS 9 systems with the 192 Digital I/O interface only. The Pro Tools 5.3.1r2 download includes version 5.3.1r2 of the Digidesign StreamManager (512 sample buffer) which has the following fix:

  • DirectConnect plug-ins or applications like Soft SampleCell and Native Instruments did not work with the 192 Digital I/O

The Pro Tools 5.3.1r2 download does not include this Digidesign StreamManager_128 file (128 sample buffer) with the same fix for the 192 Digital I/O, but with the smaller sample buffer size. If you have a Pro Tools|HD Macintosh system and the 192 Digital I/O, this download can be used instead of the Digidesign StreamManager_128 file located on your Pro Tools|HD 5.3 or 5.3.1 CD in the Beta & Bug Fix folder.

Please review the included StreamManager_128 ReadMe.pdf v5.3.1r2 for installation and additional instructions

Jun. 2001
5.1.1
273 k

Digidesign® StreamManager 5.1.1

Ships with Pro Tools TDM & LE v5.1.1

To install: place this in your System Folder/Extensions.

Feb. 2001
5.1
266 k

Digidesign® StreamManager 5.1

Ships with Pro Tools TDM & LE v5.1

To install: place this in your System Folder/Extensions.

For DAE and DSI see the DAE/DSI download page

 

If you experience download or decoding problems, see the Download Help FAQ

Newer Mac downloads require Stuffit Expander 5.1.2 or higher

Download Aladdin's FREE Stuffit Expander for Mac or Windows


More Information:

Digidesign Downloads | Digidesign Customer Service | Digidesign Technical Support