Digi 001 with Pro Tools LE for Mac OS 9 Requirements

Digidesign Hardware Supplied with System

  • Digi 001 PCI Card
  • Digi 001 I/O Box
  • Digi 001 Cable

Digidesign Software Compatiblity

Pro Tools LE version 5.1.1 will not work with any hardware other than the Digi 001 or the Audiomedia III card, and will not work in "standalone" mode without the Digidesign hardware installed.

Control Surfaces & MIDI Interfaces

Video Capture Cards

DigiRack Plug-Ins & Optional Digidesign Software

Qualified Floppy Drives

Optional Digidesign Hardware

Digi 001 Product Information

Supported CPU Models, Speeds & Requirements*

Highly Recommended:

Also Supported:

  • Power Macintosh 9600 (200 MHz or higher)

Caution, Known Performance Issues:

Additional Computer Requirements

System Software: Mac OS v9.0.4, 9.1, 9.2, 9.2.1, or 9.2.2 (depending on CPU model)

Total System RAM:

  • 128 MB minimum, 192 MB highly recommended. More RAM increases overall system and Pro Tools performance.
  • Note: Some users with newer Mac systems have been unable to launch Pro Tools LE with the minimum 128 MB RAM. Due to the increased RAM requirements of the Mac OS and newer Apple computer models, a minimum of 192 MB of RAM may be required in these systems.
  • Pro Tools LE application "Preferred" memory allocation set to 40 MB
  • DAE "Preferred" memory allocation set to 30 MB
  • Additional RAM required for simultaneous use with MIDI sequencers
  • 192 MB RAM required for use with DigiStudio
  • Virtual memory is not supported

CD-ROM drive for software installation

Monitor, color required, minimum resolution of 1024 x 768

Opcode OMS v2.3.8 or higher (supplied)

Apple QuickTime v4.1.2 or higher (QuickTime 4.1.2 is supplied on your Pro Tools CD. QuickTime 5.0.2 is also supported)

Storage: Hard Drive Minimum Requirements

*Note: Digi 001 systems require at least one PCI slot. Apple computers that do not contain PCI slots, such as the G4 Cube and iMac, are not supported with the Digi 001.