Other Digidesign PCI Card Options - Pro Tools|24 for the Mac OS

MIX Farm: Adding a MIX Farm to a Pro Tools|24 system d24 core card enables a MIX Farm to act as a MIX Core. A maximum of 7 MIX Farm or MIX Core cards in a single system is supported. If you are adding one or more MIX Farm cards to a Pro Tools|24 system, refer to the Pro Tools Expanded Systems Guide in the Technical Document Library of the Support/Tech Support section of the website. MIX Farm Overview | MIX Core Overview

DSP Farm*: DSP Farms with serial numbers lower than FG10501 may be used for Plug-In operation but do not support connection of an Audio Interface.

Pro Tools|24 Expansion Kit (discontinued)

SampleCell II Plus: Pro Tools 5.1.1 required for more than one SampleCell II or SampleCell II Plus card in 2001 AGP G4 models (466MHz, 533MHz, Dual 533MHz, 667MHz, and 733MHz).

SampleCell II*

SampleCell II TDM Module

*Incompatibility with older DSP Farms and SampleCell II Cards & The Blue & White G3 and G4. A rev "QC" or later of the AMCC chip is required for Blue & White G3 and G4 compatibility. This rev number appears on the AMCC chip following number "5933". Older versions can cause your computer to hang while booting or when launching Pro Tools or DigiTest. QC or higher chip is required for compatibility with the PCI 2.1 spec. Ways to identify these boards are in the grid below:

If a customer has previously updated their board (or received a refurbished card), the serial number will remain the same, but the board rev will be updated (and the AMCC chip will have "QC" or later). Cards with the rev "Q" chip can be upgraded. Please contact your local Digidesign office using the following procedure:

• Digidesign Product Repairs & Hardware Modifications

Note: All SampleCell II Plus cards are newer, and therefore already have the compatible chip.(The SampleCell II Plus cards are the same as the original SampleCell II PCI cards, but with the included 32 MB of RAM soldered on the card)