Expansion Chassis Information - Pro Tools III

• SBS (Bit3) 7-Slot model 2101-00-2 (must use IBM PCI 2.1 compliant Bridge chips, with host card that starts with 20-101)

• Magma 7-Slot model PXB-7-RMD

For further information about these products, please contact your Authorized Digidesign Dealer and ask for the Digidesign Development Partner Catalog, or available online at www.DigiDevelopers.com

Expansion Chassis Requirements

• Requires 2 or 4 ft Expansion Chassis cable - 6 ft cables not supported

• When used with G3 or G4 computers the Chassis is required to have PCI 2.1 compliant bridge chips

For more information about expansion chassis setup and card order configurations please download the Pro Tools 5.0.1 Expanded Systems Guide in the Technical Document Library of the Support/Tech Support section of the website. For updated slot order information with the latest Digidesign and Magma 13-slot chassis download this PDF.

Digidesign Card Requirements:

• DSP Farm cards: must be Rev H or higher (serial number FF09226 or higher) for compatibility with Expansion Chassis.

• SampleCell II cards: must be Rev D or higher (serial number HH02001 or higher) for compatibility with Expansion Chassis.

Customers with older cards should contact their local Digidesign office.