Pro Tools 6.0.1cs2

For Pro Tools 6.0.1 TDM Systems


Index of All Pro Tools CS Updates

May 2003

Pro Tools TDM 6.0.1cs2 Update for USD Owners

(Pro Tools application only)

System Requirements

  • Pro Tools|24 or Pro Tools|24 MIX hardware
  • Universal Slave Driver (USD)
  • Pro Tools TDM 6.0.1
  • Mac OS X version 10.2.3, 10.2.4, 10.2.5 or 10.2.6

Fixes Included with Pro Tools TDM 6.0.1cs2

  • Random Occurrence of Time Code Lock Dropouts

What’s Fixed in Pro Tools TDM 6.0.1cs2?

Pro Tools TDM 6.0.1cs2 contains the following:

Fixed: Random Occurrence of Time Code Lock Dropouts (Item #15614)

Occasionally with previous versions of Pro Tools software and the Universal Slave Driver, Pro Tools would drop out of time code lock. This was due to a communication problem between Pro Tools and the Universal Slave Driver, which is fixed by this version of Pro Tools.

Who Should use Pro Tools TDM 6.0.1cs2?

This update should be used only by:

  • Pro Tools TDM 6.0.1 users with a Universal Slave Driver (USD) on Macintosh-based Pro Tools|24 or Pro Tools|24 MIX systems (OS X)

Pro Tools TDM 6.0.1cs2 can only be used to update Pro Tools TDM 6.0.1 on Mac OS X. If you are using a version of Pro Tools earlier than 6.0.1, you must first upgrade to Pro Tools 6.0.1, then install the Pro Tools TDM 6.0.1cs2 application.

Updating Pro Tools

To install Pro Tools TDM 6.0.1cs2 on Mac OS X:

  1. Pro Tools TDM 6.0.1 must already be installed

  2. Quit the Pro Tools application if it is open.

  3. Replace the current Pro Tools 6.0.1 application with the included Pro Tools 6.0.1 file (version 6.0.1cs2). The file location is as follows: Applications > Digidesign > Pro Tools > Pro Tools 6.0.1.

  4. After replacing the Pro Tools application, launch Pro Tools.

Important: We recommend that only the Pro Tools users specified above use this update. Pro Tools TDM 6.0.1cs2 is provided as an interim "customer support (CS)" release to address the issues described. While our testing has not shown these changes to introduce other problems, this version has not been fully qualified by Digidesign.

Download Instructions — Pro Tools TDM 6.0.1cs2 Update

For best results, use the latest version of Internet Explorer or Netscape Navigator for Mac OS X. Other browsers, such as Apple's Safari Public Beta, may not work properly with this download. This Mac download is a 14.5 MB MacBinary (.bin) encoded Mac OS X Disk Image (.dmg) file that requires Stuffit Expander version 5.1 or higher, included with Mac OS X.

  • Click on the Apple icon below to access the validation form.
  • Download the Pro Tools TDM 6.0.1cs2 Update to your local hard drive.
  • Once the download is complete, double-click the downloaded file to decode if it does not expand automatically.

This Pro Tools 6.0.1cs2 Update requires a Universal Slave Driver and a Pro Tools|24 or MIX TDM system with Pro Tools TDM version 6.0.1 already installed.

Your registered Pro Tools 6.0 TDM serial number is required to download. This can be found in the following location:

  • Inside the front cover of your Pro Tools 6.0 system Getting Started Guide

 

If you experience download or decoding problems, see the Download Help FAQ

Pro Tools TDM 6.0.2cs2 is only available as a download


More Information:

Digidesign Downloads | Digidesign Customer Service | Digidesign Technical Support